Audio/Visual (A/V) sound system is inadequate to address regional functions. We should have a scalable A/V system to accommodate all functions at the center.
It is not sustainable to depending on a patch work of temporary integrate AV systems by one or two individuals for setup and tear down sound systems whenever we have one of these regional functions. .
Allowing a handful of people to dominate the A/V system can lead to several issues including limited perspectives, bias or subjectivity, lack of collaboration, burnout of individuals, limited skill development by other members , and lack of Inclusivity.
In our Center, clarity of speech and music is paramount. A good sound system ensures that everyone in the congregation can clearly hear the message being delivered, whether it's spoken word, music, or other audio elements. It is important to note that whenever we are swapping our AV systems to accommodate regional functions, we are always challenged with the following:
1 . Time and Effort: Each time we swap sound systems, it consumes many man hours, time and effort to plan, install, and calibrate systems. This can be disruptive to regular Center activities and may require the involvement of volunteers.
2. The Learning Curve: With each new setup of the sound system, there's a learning curve for Center members or volunteers who operate the equipment. Frequent changes can lead to confusion and mistakes during functions activities until members becomes familiar with the new setup.
3. Inconsistency: Constantly changing sound systems can lead to inconsistencies in sound quality and performance. Different systems may have different features, strengths, and weaknesses, resulting in varying experiences for the center from week to week.
4. Engagement: A high-quality sound system helps to keep the congregation engaged during services. When people can hear and understand what's being said or sung, they're more likely to stay attentive and connected to the service.
5. Music Quality: A good sound system enhances the quality of the music, allowing for a more enjoyable and uplifting Bhajan Singing experience.
While it's important for the center to invest in quality sound systems that meet their needs, it is important to note that frequently changing setups should be approached thoughtfully to minimize disruptions and maximize the long-term value of the investment. Having a structured process in place for operating the Center' A/V system promotes consistency, efficiency, quality control, and ultimately enhancing the worship experience for the congregation.
How to service a Markie Mixing Console. Mixer Cleaning. Mixing Desk Service. - With the chassis empty, it's time to clean the PCBs. It's best to wear a glove when doing this as static from your hands can cause issues. First I go over the PCBs with cans of compressed air to remove the worst of the dust - do this away from where you're working so the dust doesn't go over the open mixing desk or the other PCBs. Next use a flux brush as a dusting brush and thoroughly go between and around every component on the PCB.
Now's the fun part. Grab the Deoxit D5 and put a tiny amount on every button, switch and knob shaft. If you press the can very lightly a small amount will dribble out rather than have a huge amount spraying everywhere. It's quicker to do a few buttons at a time or a few shafts at a time. press the button repeatedly to really work the D5 in and turn the knob shafts several times until they loosen up. The knob shafts should feel really nice once the D5 has been worked in.
Once you'e gone over ever knob, button and switch, use some 99.9% Isopropyl alcohol and spray it over the PCB. Work this in using a new flux brush. This should evaporate fairly quickly and should clean off any gunk or residue from other products you've used.
This is a Mackie 24 8 desk which may look like a large format mixing desk but it isn't. Each group of 8 channels come on 1 PCB and the same goes for the master section so it's a simple and easy desk to take apart.
Tools
- Qtips
- Compress Air
- Deoxit D5
- 99.9% Isopropyl alcohol
- Allen Key 1.5mm
- Rachet & Socket
- Phillips Head Screwdriver
- Pliers
No comments:
Post a Comment