Sai Unity Center Audio /Video Systems
Description
The Boston Unity Center (SCU) Audio System consists of the following
components:
1.
3 pairs
of speakers
a.
2 forward
stand power speakers (each
on both sides of the alter)
b. 2 floor monitoring passive speakers (each on
the floor by singers and musicians)
c. 2 side passive speakers (each on both sides
of the hall)
2.
A Markie
Master Console Mixer
3.
2 Peavey
Power Amplifiers
4.
1 Snake
from Master Console to singers and musicians
Here
is the standard operating procedure to power on SCU Audio System.
1.
Connect Sennheiser microphones to color
coded wires from snake for ladies, men and musical instruments. Setup
microphones on each mic stand.
a.
Ladies: 1- Red, 2- White, 3 -Blue
b.
Men: 5- Orange, 6 -Yellow, 7 - Gray
c.
Tabla: 8 - Green
d.
Harmonium 9 - Green
2.
Turn power switch ON for
the yellow Power Surge Protector (on the floor by the table)
3.
Turn power switch ON for
the Markie Master Console Mixer (switch at the front right-hand
side)
a.
Mute ALL Channels
4.
Turn power switch ON
Both Peavey amplifiers
5.
Turn power switch ON both
forward stand power speakers
How to Power OFF Audio
System
To power OFF the SCU Audio System,
follow the procedures below:
- Mute ALL
channels on Markie Master Console Mixer
- Turn
power switch OFF
both forward stand speakers (note
these are power speakers)
- Turn
power switch OFF
Both Peavey amplifiers
- Turn power switch OFF on the Markie Master Console Mixer
- Turn
power switch OFF
on the yellow Power Surge Protector (on the floor by the table)
- Disconnect
ALL Sennheiser microphones and return it to their respective case
Note:
1.
Before you turn on the zoom laptop make sure the
audio system is turn on so that it will automatically sense the Makie Mixer and
load the correct driver for zoom audio.
2.
DO NOT plug
in any musical instruments such as keyboards, guitars etc directly into the
Markie Master Console. Please consult
your Audio Team for an DI adaptor.
No comments:
Post a Comment